Dell PowerVault LTO5-140 - Manual (Page 35)

Back to Contents Page
Maximum wet bulb temperature 26°C (79°F)
Internal Drive
Physical Specifications
Width (without bezel) 146.0 mm (5.75 in)
Width (with bezel) 148.0 mm (5.83 in)
Length (without bezel) 205.0 mm (8.09 in)
Length (with bezel) 210.0 mm (8.29 in)
Height (without bezel) 41.0 mm (1.63 in) without bezel
Height (with bezel) 42.7 mm (1.69 in) with bezel
Weight (without a cartridge) 1.61 kg (3 lb 9 oz)
Power Supply Requirements
Tolerance + 5 VDC and + 12 VDC (plus or minus 10%)
Steady State Current for 5 VDC 1.9 A minimum/3.4 A maximum
Steady State Current for 12 VDC 0.2 A minimum/1.1 A maximum
Peak supply current for 5 VDC 3.6 A for 100 ms (18 W)
Peak supply current for 12 VDC 4.1 A for 2 ms (49.2 W)
Power Usage
Idle mode with no cartridge 6.5 W
Idle mode with a cartridge loaded 6.5 W
Reading and writing at 5.46 m/s 24 W
Performance
Interfaces 6Gb SAS
Recording format LTO Ultrium Generation 5
Media LTO Ultrium
Capacity 1500 GB (native) 3000 GB (compressed, assuming 2:1 compression)
Data transfer rate (maximum) 140 MB/sec Native
Burst transfer rate up to 600 MB/sec for SAS
Operating Limits
Temperature 10° to 38°C (50° to 100°F)
Humidity 20% to 80% relative humidity (non-condensing)
Maximum wet bulb temperature 26°C (79°F)
Maximum altitude 3048 m (10,000 ft)
Non-operating Limits (Storage)
Temperature -40° to 60° (-40° to 140°F)
Humidity 10% to 90% relative humidity (noncondensing)
Maximum wet bulb temperature 26°C (79°F)