Dell Inspiron 13 (7347, Mid 2014) - Manual (Page 68)

Replacing the Stylus-Holder
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Place the stylus holder and stylus lock on the palmrest and keyboard
assembly.
2 Align the screw hole on the stylus holder with the screw hole on the
palmrest and keyboard assembly.
3 Replace the screw that secures the stylus holder and stylus lock to the
palmrest and keyboard assembly.
4 Align the screw hole on the stylus lock with the screw hole on the
palmrest and keyboard assembly.
5 Replace the screw that secures the stylus lock to the palmrest and
keyboard assembly.
6 Insert the stylus into the stylus holder and push to snap it in place.
Post-requisites
1 Replace the display assembly .
2 Replace the battery .
3 Replace the base cover .
68