Dell Inspiron 13 (7347, Mid 2014) - Manual (Page 33)

Removing the Power and
Volume-Buttons Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover .
2 Remove the battery .
3 Follow the procedure from step 1 to step 3 in “Removing the Hard Drive ”.
Procedure
1 Peel off the adhesive tape that secures the power and volume-buttons
board cable to the palmrest and keyboard assembly
2 Disconnect the power and volume-buttons board cable from the system
board.
3 Remove the power and volume-buttons board cable from the routing
guides on the speaker.
4 Peel off adhesive the tape that secures the power and volume-buttons
board to the speaker.
33