Dell Inspiron 13 (7347, Mid 2014) - Manual (Page 62)

5 Peel off the adhesive tape on the Windows-button board connector and
disconnect it form the system board.
1 wireless card 2 antenna cables (2)
3 screws (2) 4 display-cable bracket
5 display cable 6 windows-button board
cable
7 adhesive tape
6 Turn the computer over and open the display as far as possible.
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
7 Place the computer face down on a flat surface.
8 Remove the screws that secure the display assembly to the palmrest and
keyboard assembly.
9 Peel off the adhesive tape that secures the the display cable to the
palmrest and keyboard assembly.
62