Dell Inspiron 13 (7347, Mid 2014) - Manual (Page 42)

Replacing the Touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the tabs on the touchpad into the slots on the palmrest and
keyboard assembly.
2 Adhere the adhesive tape that secures the touchpad to the palmrest and
keyboard assembly.
3 Align the screw holes on the touchpad bracket with the screw holes on
the palmrest and keyboard assembly.
4 Replace the screws that secure the touchpad bracket to the palmrest and
keyboard assembly.
5 Slide the touchpad cable into the touchpad connector and press down
the latch to secure the cable.
6 Slide the keyboard cable into the keyboard daughter-board connector
and press down the latch to secure the cable.
Post-requisites
1 Replace the battery .
2 Replace the base cover .
42