New-dr2000v, Purpose, Syntax – Dell PowerVault DR2000v User Manual
Page 17: Parameters

6
Using the Supported cmdlets for the DR2000v for
Hyper-V
The supported cmdlets for the DR2000v for Hyper-V include capabilities for creating a new DR2000v as well as shutting
down, restoring, and removing a DR2000v.
The supported cmdlets are included in the binary modules: DELL-DR2000v.dll, and DELL-DR2000v. psd1. The .dll and .psd1
files are included in the uncompressed installation package under the “bin” folder.
To use these cmdlets, you must ensure the prerequisites have been met for Hyper-V as described in the topic,
“Prerequisites for the Dell DR2000v on Microsoft Hyper-V.”
Refer to the following topics for syntax details for using these cmdlets.
•
New-DR2000v
•
Remove-DR2000v
•
Repair-DR2000v
•
Start-DR2000v
•
Stop-DR2000v
New-DR2000v
Purpose
To create a new DR2000v virtual machine.
Syntax
New-DR2000v -Name
Size
Password
Parameters
•
Name: Specify the DR2000v name.
•
Image: Specify the UNC path location of the DR2000v base image file. In PowerShell, this will provide the UNC path
$env:DR_ImagePath. For example:
New-DR2000v -Name DR2000v-New -Image $env:DR_ImagePath
•
Size: Specify the size of the image with one of the following values: 1TB, 2TB, or 4TB. (Note that 4TB is only available
for Microsoft Hyper—V 2012 and Microsoft Hyper–V 2012 R2.)
•
ComputerName: Specify the Hyper-V server name, hostname, or fully qualified domain name.
17