Dell PowerVault ML6000 - Manual (Page 85)

Dell PowerVault ML6000 Basic SNMP Reference Guide 79
110 controlStatusChange RAS Status Change: Control
a
Indicates that a library control problem has been
detected.
Indicates that the status of the control subsystem (which
includes system firmware, the operator panel, and the
Library Control Blade) has changed. If the return value
indicates that a problem exists, use the operator panel
or remote web client to determine how to resolve the
issue.
111 coolingStatusChange RAS Status Change: Cooling
a
Indicates that the status of the cooling subsystem has
changed. If the return value indicates that a problem
exists, use the operator panel or remote web client to
determine how to resolve the issue.
112 drivesStatusChange RAS Status Change: Drives
a
Indicates that the status of the drives and/or media has
changed. If the return value indicates that a problem
exists, use the operator panel or remote web client to
determine how to resolve the issue.
113 mediaStatusChange RAS Status Change: Media
a
Indicates that the status of the media has changed. If
the return value indicates that a problem exists, use the
operator panel or remote web client to determine how to
resolve the issue.
114 powerStatusChange RAS Status Change: Power
a
Indicates that the status of the power subsystem has
changed. If the return value indicates that a problem
exists, use the operator panel or remote web client to
determine how to resolve the issue.
115 roboticsStatusChange RAS Status Change: Robotics
a
Indicates that the status of the robotics subsystem has
changed. If the return value indicates that a problem
exists, use the operator panel or remote web client to
determine how to resolve the issue.
116 operatorInterventionRequired RAS Status Change: Operator Intervention
Required
a
Indicates that an error has occurred and that operator
intervention is required in order to resolve the issue.
117 driveOnlineStateChange Drive Online State Change
Indicates that a tape drive has been taken online or
offline.
Table 1 Status Traps (Continued)
Trap ID Trap Description
a. The library issues a trap whenever the aggregate state of one of the Reliability, Availability, and Serviceability (RAS) status
groups changes. Listening for these traps (rather than querying for them) is the preferred method of monitoring the
health of the library.