Audio video button board, Removing the audio video (av) button board, Replacing the audio video (av) button board – Dell Inspiron One 2305 (Mid 2010) User Manual
Page 8
Back to Contents Page
Audio Video Button Board
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the Audio Video (AV) Button Board
Replacing the Audio Video (AV) Button Board
Removing the Audio Video (AV) Button Board
1.
Follow the instructions in
Before You Begin
.
2.
Remove the back cover (see
Removing the Back Cover
).
3.
Follow the instructions from
step 2
to
step 5
in
Removing the Front Stand
.
4.
Disconnect the AV button board cable from the connector on the AV button board.
5.
Remove the two screws that secure the AV button board to the chassis.
6.
Carefully slide and lift the AV button board away from the computer.
Replacing the Audio Video (AV) Button Board
1.
Follow the instructions in
Before You Begin
.
2.
Gently slide the AV button board into the slot on the middle frame.
3.
Align the screw holes on the AV button board with the screw holes on the chassis
4.
Replace the two screws that secure the AV button board to the chassis.
5.
Connect the AV button board cable to the connector on the AV button board.
6.
Follow the instructions from
step 4
to
step 5
in
Replacing the Front Stand
.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
AV button board cable
2
AV button board
3
screws (2)