Dell Inspiron One 2305 (Mid 2010) - Manual (Page 78)

Main
System Information Displays the system name
BIOS Version Displays the BIOS version number
System Date Displays the current date in mm/dd/yyyy format
System Time Displays the current time in hh:mm:ss format
Service Tag Displays the service tag of the computer when the service tag is present
Asset Tag Displays the asset tag of the computer when the asset tag is present
Processor
Information
Processor Type Displays the processor information
L1 Cache Size Displays the L1 cache size
L2 Cache Size Displays the L2 cache size
L3 Cache Size Displays the L3 cache size
Memory Information
Memory Installed Indicates the amount of memory installed in MB
Memory Available Indicates the amount of memory available in MB
Memory Speed Indicates the memory speed in MHz
Memory Technology Indicates the type of installed memory
Device Information
SATA 0 Displays the SATA drive connected to the SATA 0 connector
SATA 1 Displays the SATA drive connected to the SATA 1 connector
Advanced
CPU Configuration l Hyper-Threading — Enabled or Disabled (Enabled by default)
l Multi Core Support — All; 1; 2 (All by default)
l Limit CPUID Value — Enabled or Disabled (Disabled by default)
l CPU XD Support — Enabled or Disabled (Enabled by default)
l Intel Virtualization Technology — Enabled or Disabled (Enabled by default)
l Intel(R) SpeedStep — Enabled or Disabled (Enabled by default)
System
Configuration
l Onboard Audio Controller — Enabled or Disabled (Enabled by default)
l Onboard LAN Controller — Enabled or Disabled (Enabled by default)
l Onboard LAN Boot ROM — Enabled or Disabled (Disabled by default)
l SATA Mode — IDE Mode or AHCI Mode (AHCI Mode by default)
l USB Controller — Enabled or Disabled (Enabled by default)
l DVMT/FIXED Memory — 128MB; 256MB; Maximum (256MB by default)
Power Management l AC Recovery — Power On; Power Off; Last Power State (Power Off by default)
l Remote Wake Up — Enabled or Disabled (Enabled by default)
l Auto Power On — Enabled or Disabled (Disabled by default)
l Auto Power On Date — 0 to 31 (15 by default)
l Auto Power On Hour — 0 to 23 (12 by default)
l Auto Power On Minute — 0 to 59 (30 by default)
l Auto Power On second — 0 to 59 (30 by default)
Post Behavior l Numlock Key — On or Off (On by default)
l Keyboard Errors — Report or Do Not Report (Report by default)
Security
Admin Password Allows to set, change, or delete the administrator password
NOTE: Deleting the administrator password will delete system password. Hence, the administrator password must be set before
setting the system password.
System Password Allows to set, change, or delete the system password
Password on Boot Enabled or Disabled (Enabled by default)
Boot
1st Boot Priority Specifies the boot sequence from the available devices
USB Storage Device; Hard Drive; CD/DVD/CD-RW Drive; Diskette Drive; Network; Disabled (Hard Drive by default)
2nd Boot Priority Specifies the boot sequence from the available devices
USB Storage Device; Hard Drive; CD/DVD/CD-RW Drive; Diskette Drive; Network; Disabled (CD/DVD/CD-RW Drive by default)