Display cable, Replacing the display panel, Removing the display cable – Dell Inspiron One 2305 (Mid 2010) User Manual
Page 27
1.
Follow the instructions in
Before You Begin
.
2.
Follow the instructions from
in
.
3.
Remove the four screws that secure the display panel to the chassis.
4.
Remove the display cables, touch screen cables, and display panel power cable from the routing guides on the chassis.
5.
Remove the display panel off the chassis.
Replacing the Display Panel
1.
Follow the instructions in
Before You Begin
.
2.
Route the display cables, touch screen cables, and display panel power cable through the routing guides on the chassis.
3.
Align the screw holes on the display panel with the screw holes on the chassis and replace the four screws.
4.
Follow the instructions from
in
.
5.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Display Cable
Removing the Display Cable
1.
Follow the instructions in
Before You Begin
.
2.
Remove the display panel (see
3.
Turn the display panel over.
4.
Using the pull tab on the display cable, disconnect the display cable from the connector on the display panel.
NOTE:
The number of screws that secure the display panel to the chassis may vary.
1
screws (4)
2
display panel
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.