Dell Inspiron One 2305 (Mid 2010) - Manual (Page 61)

d. Place the processor lightly in the processor socket and ensure that the processor is positioned correctly.
e. Pivot the processor socket release lever back towards the processor socket, and snap it into place to secure the processor.
f. Clean the thermal grease from the bottom of the heat sink.
g. Apply the new thermal grease to the top of the processor.
Inspiron One 2310
a. Align the pin-1 corner of the processor with the pin-1 corner of the ZIF socket.
b. Place the processor lightly in the processor socket and ensure that the processor is positioned properly.
c. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor to the system board.
d. Clean the thermal grease from the bottom of the heat sink.
e. Apply the new thermal grease to the top of the processor.
3. Replace the processor heat-sink (see Replacing the Processor Heat Sink ).
4. Replace the processor heat-sink fan (see Replacing the Processor Heat-Sink Fan ).
5. Replace the MXM-assembly (see Replacing the MXM Assembly ).
6. Replace the MXM-assembly fan (see Replacing the MXM-Assembly Fan ).
7. Replace the system-board shield (see Replacing the System-Board Shield ).
8. Follow the instructions from step 4 to step 5 in Replacing the Front Stand .
9. Replace the back cover (see Replacing the Back Cover ).
CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a
requirement for optimal processor operation.
CAUTION: Socket pins are delicate. To avoid damage, ensure that the processor is aligned properly with the processor socket, and do not use
excessive force when you install the processor. Be careful not to touch or bend the pins on the system board.
CAUTION: You must position the processor correctly in the processor socket to avoid permanent damage to the processor.
NOTE: The pin-1 corner of the processor has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.
1 ZIF socket 2 processor
3 processor pin-1 indicator 4 ZIF-socket cam screw
CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a
requirement for optimal processor operation.
CAUTION: Ensure that the processor heat sink is correctly seated and secure.