Dell Dimension 9100 - Manual (Page 114)

114
Appendix
www
.dell.com | support.dell.com
NOTE:
To boot to a USB device, the device must be bootable. To make sure your device is bootable,
check the device documentation.
Changing Boot Sequence for Future Boots
1 Enter system setup (see page 108).
2 Use the arrow keys to highlight the Boot Sequence menu option and press to access
the menu.
NOTE:
Write down your current boot sequence in case you want to restore it.
3 Press the up- and down-arrow keys to move through the list of devices.
4 Press the spacebar to enable or disable a device (enabled devices have a checkmark).
5 Press plus (+) or minus (–) to move a selected device up or down the list.
Clearing Forgotten Passwords
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 55.
RTCRST
3 2 1
PSWD
3 2 1