Dell POWEREDGE 2950 - Manual (Page 10)

10
Installing a SATA Optical Drive
Figure 1-5. SATA Cable Routing in a PowerEdge 2900 or 1900
8 Reconnect the cables to the SAS controller daughter card.
9 Close the system. See "Closing the System" in your Hardware Owner’s
Manual.
10 Reconnect the system to power and turn on the system and attached
peripherals.
1 optical drive 2 SATA power cable
3 SATA data cable 4 SATA connector on system board
5 SATA power connector on SAS
backplane (PowerEdge 2900 only)
3
2 4
1
5