Dell Inspiron 700M - Manual (Page 5)

Screw Identification Placemat
When you are removing and replacing components, photocopy the placemat as a tool to lay out and keep track of the screws. The placemat provides the
number of screws and their sizes.
Back to Contents Page
NOTICE: When reinstalling a screw, you must use a screw of the correct diameter and length. Ensure that the screw is properly aligned with its
corresponding hole, and avoid overtightening.
Cooling Fan:
(3 each)
M2 x 3mm
Keyboard:
(2 each)
M2.5 x 5mm
Display Module:
(4 each)
M2.5 x 6 mm
Modem:
(2 each)
M2 x 5mm
Palm Rest:
(1 each) (2 each)
M2 x 3 M2 x 5mm
(8 each)
M2.5 x 6mm
System Board:
(1 each)
M2 x 5mm