Dell PowerVault NX200 - Manual (Page 30)

30 Using Your NAS System
4 Go to the UNM server, copy the password, and group the files you
collected in the previous step to a local disk.
5 Go to Add or Remove Programs Add Windows Components Select
Other Network File and Print Services.
6 Click Details.
7 Select Microsoft Services for NFS, click Details and select User Name
Mapping.
8 Click Next and complete the installation.
NOTE: Reboot your system after the installation is complete.
Configuration Steps
1 Go to the NFS client, obtain the /etc/passwd and /etc/group files and copy
them to a USB key.
2 Go to the UNM server and copy the UNIX files from the USB key to a local
hard disk. Open Microsoft Services for NFS.
3 Select User Name Mapping and then right-click Properties.
4 Go to UNIX User Source tab and select the Use Password and Group Files
option.
5 Click the Browse button, select the password and group files that you had
copied in the previous step.
6 Go to the Simple Mapping tab, select the Use simple maps option, and
click Apply.
7 Select User Maps, and right-click Create Map.
8 Click List Windows Users and List UNIX Users options. Map the users
(select one user at a time) and add to the list. Repeat this step for other
listed users.
9 Open Group MapsCreate Maps.
10 List Windows & Unix groups, map them and add to the list.
Open the .maphosts file (C:\Windows\msnfs and
C:\Windows\amd64\cmpnents\r2 and look for the .maphosts file) and add
the NFS server details (IP 4 address or host name, if DNS exists) and save the
file.
book.book Page 30 Thursday, September 2, 2010 2:36 PM