Dell Inspiron 510m - Manual (Page 41)

Using the Module Bay
41
Using the Module Bay
About the Module Bay
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
You can install devices such as a floppy drive, CD drive, CD-RW drive, DVD drive,
CD-RW/DVD drive, DVD+RW, second battery, or second hard drive in the module bay.
Removing and Installing Devices While the Computer Is
Turned Off
NOTE:
You can remove and install devices while the computer is running and connected to a docking
device (docked).
NOTICE:
To prevent damage to devices, store them in a safe, dry place when they are not installed in the
computer. Avoid pressing down on them or placing heavy objects on top of them.
1 Press the device latch release.
2 Pull the device out of the module bay.
3 Push the new device into the bay until it clicks.
D7898bk2.book Page 41 Friday, April 29, 2005 9:39 AM