Dell Precision M4600 (Early 2011) - Manual (Page 116)

Installing The RGB Camera Cable
1. Place the camera cable on the display cover.
2. Replace the adhesives to secure the camera cable in place.
3. Connect the camera cable to the camera and microphone module.
4. Install the RGB Low-Voltage Differential Signaling (LVDS) cable .
5. Install the display hinge, hinge cap, hinge tower .
6. Install the RGB display panel .
7. Install the touch screen display bezel .
8. Install the display assembly .
9. Install the palm rest .
10. Install the hard drive .
11. Install the optical drive .
12. Install the keyboard .
13. Install the keyboard trim .
14. Install the base cover .
15. Install the battery .
16. Follow the procedures in After Working Inside Your Computer .
116