Dell Precision M4600 (Early 2011) - Manual (Page 112)

Installing The Low-Voltage Differential Signaling (LVDS) Camera Cable
1. Secure the low-voltage differential signaling (LVDS) cable to its routing
channel.
2. Replace the adhesives to secure the LVDS and camera cable in place.
3. Connect the LVDS and camera cable to the camera.
4. Install the
display hinge, hinge cap, hinge tower .
5. Install the standard display panel or the touchscreen display panel .
6. Install the standard display bezel or the touchscreen display bezel .
7. Install the display assembly .
8. Install the palm rest .
9. Install the hard drive .
10. Install the optical drive .
11. Install the keyboard .
12. Install the keyboard trim .
13. Install the base cover .
14. Install the battery .
15. Follow the procedures in After Working Inside Your Computer .
Removing The RGB Low-voltage Differential Signaling (LVDS) Cable
1. Follow the procedures in Before Working On Your Computer .
2. Remove the battery .
3. Remove the base cover .
4. Remove the keyboard trim .
5. Remove the keyboard .
6. Remove the optical drive .
7. Remove the hard drive .
8. Remove the palm rest .
9. Remove the display assembly .
10. Remove the touchscreen display bezel .
11. Remove the RGB display panel .
12. Remove the display hinge, hinge cap, hinge tower .
13. Pry up the low-voltage differential signaling (LVDS) cable from the LCD
112