Dell Latitude X1 - Manual (Page 38)

Modem
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the keyboard .
3. Remove the display assembly .
4. Remove the palm rest .
5. Remove the existing modem:
a. Remove the captive ground screw from the modem-cable ground wire and the M2 x 3- mm modem screw that secures the modem to the system
board.
b. Pull straight up on the attached pull-tab to lift the modem out of the connector on the system board, and disconnect the modem cable.
6. Connect the modem to the modem connector on the system board.
7. Align the modem with the screw hole, and press the modem into the connector directly over the connector on the system board.
8. Replace the M2 x 3-mm modem screw and secure the modem to the system board.
9. Secure the ground screw to the system board.
10. Connect the modem ground cable to the system board connector.
Back to Contents Page
CAUTION: Before working inside your computer, read the safety instructions in your Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts.
1 M2 x 3-mm modem screw (1)
2 modem pull-tab
3 modem-cable ground wire with captive screw
4 modem cable connector
NOTICE: Cable connectors are keyed for correct insertion; do not force the connections.
NOTICE: To prevent damage to the modem, press the modem into the connector directly over the connector.