Dell Inspiron One 2330 (Mid 2012) - Manual (Page 94)

94 I/O Board
Replacing the I/O Board
Procedure
1 Align the screw holes on the I/O board with the screw holes on the chassis.
2 Replace the screws that secure the I/O board to chassis.
3 Connect the display cable and AV-in cable to the connectors on
the I/O board.
4 Replace the screw that secures the grounding cable to the chassis.
5 Connect the main power cable to the system-board connector.
Postrequisites
1 Replace the I/O board shield.
See "Replacing the I/O Board Shield" on page 82.
2 Replace the I/O cover. See "Replacing the I/O Cover" on page 77.
3 Replace the power-supply fan bracket.
See "Replacing the Power-Supply Fan Bracket" on page 73.
4 Replace the system-board shield.
See "Replacing the System-Board Shield" on page 49.
5 Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 42.
6 Replace the back cover. See "Replacing the Back Cover" on page 22.
7 Replace the stand. See "Replacing the Stand" on page 19.
8 Follow the instructions in "After Working Inside Your Computer" on page 11.
OM_Book.book Page 94 Saturday, October 6, 2012 12:50 AM