Dell Inspiron One 2330 (Mid 2012) - Manual (Page 122)

122 Camera Module
Replacing the Camera Module
Procedure
1 Align the screw holes on the camera module with the screw holes on
the middle frame.
2 Replace the screws that secure the camera module to the middle frame.
3 Connect the camera cable to the connector on the camera module.
Postrequisites
1 Replace the display panel. See "Replacing the Display Panel" on page 116.
2 Follow the instructions from step 1 to step 3 in "Replacing the System
Board" on page 101.
3 Replace the processor heat-sink fan.
See "Replacing the Processor Heat-Sink Fan" on page 65.
4 Replace the processor heat-sink.
See "Replacing the Processor Heat-Sink" on page 61.
5 Replace the I/O board. See "Replacing the I/O Board" on page 94.
6 Replace the speakers. See "Replacing the Speakers" on page 57.
7 Replace the power-supply unit.
See "Replacing the Power-Supply Unit" on page 85.
8 Replace the I/O board shield.
See "Replacing the I/O Board Shield" on page 82.
9 Replace the I/O cover. See "Replacing the I/O Cover" on page 77.
10 Replace the power-supply fan bracket.
See "Replacing the Power-Supply Fan Bracket" on page 73.
11 Replace the wireless mini-card.
See "Replacing the Wireless Mini-Card" on page 53.
12 Replace the memory modules.
See "Replacing the Memory Module(s)" on page 35.
13 Replace the system-board shield.
See "Replacing the System-Board Shield" on page 49.
OM_Book.book Page 122 Saturday, October 6, 2012 12:50 AM