Dell Inspiron One 2330 (Mid 2012) - Manual (Page 82)

82 I/O Board Shield
Replacing the I/O Board Shield
Procedure
1 Connect the power-supply fan cable to the system-board connectors.
2 Slide the power port and the power-supply control board through the slot
on the I/O board shield.
3 Align the screw holes on the I/O board shield with the screw holes
on the chassis.
4 Replace the screws that secure the I/O board shield to the chassis.
5 Replace the screw that secures the power-supply control board to the
I/O board shield.
6 Replace the screws that secure the power port to the I/O board shield.
Postrequisites
1 Replace the I/O cover. See "Replacing the I/O Cover" on page 77.
2 Replace the power-supply fan bracket.
See "Replacing the Power-Supply Fan Bracket" on page 73.
3 Replace the system-board shield.
See "Replacing the System-Board Shield" on page 49.
4 Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 42.
5 Replace the back cover. See "Replacing the Back Cover" on page 22.
6 Replace the stand. See "Replacing the Stand" on page 19.
7 Follow the instructions in "After Working Inside Your Computer" on
page 11.
OM_Book.book Page 82 Saturday, October 6, 2012 12:50 AM