Boot sequence – Dell Inspiron One 2330 (Mid 2012) User Manual
Page 132
132
System Setup
Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
• Hard Drive — The computer attempts to boot from the primary hard
drive. If no operating system is on the drive, the computer generates an
error message.
•
CD/DVD/CD-RW Drive — The computer attempts to boot from the
optical drive. If no disc is in the drive, or if the disc is not bootable,
the computer generates an error message.
•
USB Storage Device — Insert the memory device into a USB port and
restart the computer. When F12 Boot Options appears in the
lower-right corner of the screen, press
device and adds the USB flash option to the boot menu.
NOTE:
To boot to a USB device, the device must be bootable. To ensure that
your device is bootable, check the device documentation.
• Network — The computer attempts to boot from the network.
If no operating system is found on the network, the computer
generates an error message.
Exit
Save Changes and Reset
Allows you to save changes and exit system setup
Discard Changes and
Reset
Allows you to discard changes and exit system setup
Load Default
Allows you to restore the default settings
OM_Book.book Page 132 Saturday, October 6, 2012 12:50 AM