Dell PowerVault DP500 - Manual (Page 20)

20
Operating System Reinstallation
i At the Configure the Physical Disk for Microsoft Windows
Server 2003 Service Pack 2 x64 Edition screen (see Figure 4-5), select
NTFS as the file system for the boot partition.
j Under Select or enter boot partition size in megabytes, move the
slider to the right as far as possible to utilize the entire disk for boot
partition. Click Continue.
Figure 4-5. Configure the Physical Disk for Microsoft Windows Server 2003 Service
Pack 2 x64 Edition
11 At the Network Adapter(s) configuration screen, specify your IP addresses
and netmasks and click Continue. (Contact your network administrator
for assistance in determining appropriate values to enter.)
12 At the Enter OS Information screen (see Figure 4-6), enter the following
system information:
• Product ID: Leave blank, since the System Build and Update Utility
will automatically use the product identification (PID) included on
the operating system CD.