Display, Display assembly, Removing the display assembly – Dell Inspiron 1720 (Mid 2007) User Manual
Page 24

Back to Contents Page
Display
Dell™ Vostro™ 1700 and Inspiron™ 1720/1721 Service Manual
Camera and Microphone Assembly
Display Assembly
Removing the Display Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Close the display and turn the computer over.
3.
Loosen the captive screws that secure the Mini Card compartment cover, then remove the cover and set it aside.
4.
Disconnect antenna cables from any installed Mini Cards (see
Wireless Mini Cards
).
5.
Remove the two M2.5 x 8-mm screws from the bottom of the computer.
6.
Remove the two M2.5 x 8-mm screws from the back of the computer.
7.
Remove the hinge cover (see
Removing the Hinge Cover
).
8.
Remove the keyboard (see
Removing the Keyboard
).
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1
captive screws (2)
2
Mini Card compartment cover