beautypg.com

Solving problems, Beep codes – Dell Studio 1569 (Late 2009) User Manual

Page 45

background image

43

Solving Problems

This section provides troubleshooting

information for your computer. If you cannot

solve your problem using the following

guidelines, see “Using Support Tools” on

page 50 or “Contacting Dell” on page 72.

Beep Codes

Your computer may emit a series of beeps

during start-up if there are errors or problems.

This series of beeps, called a beep code,

identifies a problem. Write down the beep code

and contact Dell (see “Contacting Dell” on

page 72).

NOTE: To replace parts, see the

Service Manual available at
support.dell.com/manuals.

Beep Code Possible Problem
One

Possible system board failure —

BIOS ROM checksum failure

Two

No RAM detected
NOTE: If you installed or

replaced the memory module,

ensure that the memory module

is seated properly.

Three

Possible system board failure —

Chipset error

Four

RAM read/write failure

Five

Real Time Clock failure

Six

Video card or chip failure

Seven

Processor failure

Eight

Display failure