Dell Vostro 420 (Late 2008) - Manual (Page 63)

PCI and PCI Express Cards
63
Configuring Your Computer After Removing or
Installing a PCI or PCI Express Card
NOTE:
For information on installing drivers and software for your card, see the
documentation that shipped with the card.
Type of Card Installed Removed
Sound Card 1 Enter the system setup
program (see "System Setup
Program" on page 129 for
instructions).
2 Go to Integrated Peripherals,
select Onboard Audio
Controller, and then change
the setting to Disabled.
3 Connect the external audio
devices to the sound card’s
connectors.
1 Enter the system setup
program (see "System Setup
Program" on page 129 for
instructions).
2 Go to Integrated Peripherals,
select Onboard Audio
Controller, and then change
the setting to Enabled.
3 Connect the external audio
devices to the computer’s back
panel connectors.
Network Card 1 Enter the system setup
program (see "System Setup
Program" on page 129 for
instructions).
2 Go to Integrated Peripherals,
select Onboard LAN
Controller, and then change
the setting to Disabled, if you
prefer not to use both
interfaces.
3 Connect the network cable to
the network card’s connector.
1 Enter the system setup
program (see "System Setup
Program" on page 129 for
instructions).
2 Go to Integrated Peripherals,
select Onboard LAN
Controller, and then change
the setting to Enabled.
3 Connect the network cable to
the network connector on the
system board.