Dell Vostro 420 (Late 2008) - Manual (Page 51)

Bezel
51
Bezel
CAUTION:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see
the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
NOTICE:
The procedure for removing and replacing the bezel is identical for the
Vostro 420, Vostro 220, and Vostro 220s computers; the illustrations provided are for
example only and may not represent your particular computer precisely.
Removing the Bezel
1 Follow the procedures in "Before Working on Your Computer" on page 35.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 47).
3 With the computer still on its side, gently lift the clips slightly upward to
release that edge of the bezel from the chassis.
4 Rotate the bezel away from the computer to release the hooks on the
opposite edge of the bezel from the chassis.