Dell Dimension L___cx - Manual (Page 41)

Exit Screen
On PME This option controls how the system responds to a PCI power management enabled (PME) wakeup event. The settings for
this option are Power On or Stays Off (default).
1st Boot Device Dell Dimension Lxxxcx, Lxxxcxe, and Lxxxr:
Determines which device the system tries to boot from first. Use the up- or down-arrow key to to highlight a device. Settings
for this option are as follows:
l Floppy
l
ARMD FDD
l ARMD HDD
l IDE-HDD
l
ATAPI CD-ROM
l SCSI*
l Network*
l
Disabled
Dell Dimension Lxxxc:
Determines which device the system tries to boot from first. Use the up- or down-arrow key to to highlight a device. Settings
for this option are as follows:
l Disabled
l 1st IDE HDD through 4th IDE HDD
l
Floppy
l ARMD FDD
l ARMD HDD
l ATAPI CD-ROM
l SCSI*
l
Network*
*Where SCSI or Network is the name of the installed device.
2nd Boot
Device Determines which device the system tries to boot from if it cannot boot from the device selected for 1st Boot Device.
Settings for this option are the same as those for 1st Boot Device except for NETWORK.
3rd Boot Device Determines which device the system tries to boot from if it cannot boot from the devices selected for 1st Boot Device and
2nd Boot Device. Settings for this option are the same as those for 1st Boot Device except for NETWORK and SCSI.
4th Boot Device Determines which device the system tries to boot from if it cannot boot from the devices selected for 1st Boot Device, 2nd
Boot Device, and 3rd Boot Device. Settings for this option are the same as those for 1st Boot Device except for
NETWORK and SCSI.