Dell 1100 Laser Mono Printer - Manual (Page 22)

14 Preparing Your Printer
www
.dell.com | support.dell.com
Button
Item Description
To print a demo page In Ready mode, press and hold for 2 seconds until both LEDs blink
slowly, and release.
Manual feeding Press each time you load a sheet of paper in the tray, when you select
Manual Feed for Source from your software application. For detailed
information, see “Loading Paper Using Manual Feed Mode” on page 21.
To cancel a print job Press during printing. blinks red while the print job is cleared from
both the printer and the computer, and the printer then returns to Ready
mode. This may take some time depending on the size of the print job.
In Manual Feed mode, you can’t cancel the print job by pressing
.
Manual Duplex
feeding
Press each time you load the paper back in the tray after the first side of
your job has printed while manual duplex printing. For detailed information,
see the HTML User’s Guide.
1100-OM_EN.book Page 14 Friday, May 20, 2005 3:14 PM