Maintenance mode – Dell 968 All In One Photo Printer User Manual

Page 75

Maintenance Mode

To access Maintenance mode options:

1. From the main menu, press the up or down Arrow button to scroll to Maintenance.

2. Press the Select button .

* Factory default setting

From the Set IP Netmask menu, use the keypad to enter an IP address. Press the right

Arrow button to enter a set of numbers in the next field, or press the left Arrow button

to erase an entry. Press the Back button to save the settings.

NOTE: The IP netmask cannot be changed if DHCP is enabled.

Set IP

Gateway

Press the Select button to enter the Set IP Gateway menu.

From the Set IP Gateway menu, use the keypad to enter an IP address. Press the right

Arrow button to enter a set of numbers in the next field, or press the left Arrow button

to erase an entry. Press the Back button to save the settings.

NOTE: The IP gateway cannot be changed if DHCP is enabled.

Main Menu

Mode Main Menu

Maintenance

View Ink Levels
Clean Cartridges
Align Cartridges
Change Print Cartridges
Print Test Page
Call Diagnostics
Reset Defaults

Maintenance Mode Menu

Menu item

Action

View Ink Levels

Press the Select button to display the current ink level for each cartridge on
the screen.

Clean Cartridges

Press the Select button to clean the ink cartridges.

Align Cartridges

Press the Select button to align the ink cartridges.

Change Print

Cartridges

Press the Select button to view steps detailing how to change ink cartridges.