Dell Inspiron 20 (3045, Early 2014) - Manual (Page 35)

Replacing the Control-Buttons
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Connect the control-buttons board cable to the control-buttons board.
2 Slide the control-buttons board into the slots on the display bezel and
adhere it to the display bezel.
Postrequisites
1 Replace the back cover .
2 Replace the stand assembly .
35