Dell Inspiron 20 (3045, Early 2014) - Manual (Page 32)

Replacing the Memory
Module(s)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the notch on the memory module with the tab on the memory-
module connector.
2 Insert the memory module into the memory-module connector, and
press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module
and reinstall it.
NOTE: Use the memory module socket marked as DIMM2 if only
one memory module is in use.
1 notch 2 tab
3 Slide the tabs on the memory-module shield under the tabs on the
system-board shield until the memory-module shield is fully secured.
Postrequisites
1 Replace the back cover .
2 Replace the stand assembly .
32