Dell Inspiron 20 (3045, Early 2014) - Manual (Page 30)

Removing the Memory
Module(s)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the stand assembly .
2 Remove the back cover .
Procedure
1 Using the pull tab, slide the memory-module shield and remove it from
the system-board shield.
1 memory-module shield 2 system-board shield
2 Use your fingertips to spread apart the securing clips on each end of the
memory module connector until the memory module pops up.
30