Dell Inspiron 20 (3045, Early 2014) - Manual (Page 18)

Replacing the Stand Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the tabs on the stand into the slots on the back cover.
2 Replace the screws that secure the stand to the display-panel base.
3 Slide the tabs on the stand cover into the slots on the back cover and
snap the stand cover until it clicks into place.
If you have removed the stand base or the stand riser, follow the steps
below:
4 Slide the stand base into the slot on the stand riser.
5 Tighten the captive thumbscrew and fold the screw handle on the stand
base.
18