Canon L2000 - Manual (Page 13)

12
VIII RE-SENDING
IF No.VII ABOVE IS NOT POSSIBLE, EACH DOCUMENT
RECEIVED IN THE MEMORY CAN BE RE-SENT
INDIVIDUALLY TO ANOTHER DESTINATION FOR
PRINTING
1.
Open all three panel covers
2. Press
Memory Reference
3.
Press ▼ to display “4. RESEND DOCUMENT”
4. Press
OK
5. Press ▼ if necessary, to select a new “TX/RX No.”
(must be greater than 5000 – for received documents)
6. Press OK to display “SELECT LOCATIONS”
7. Dial the fax number
8. Press OK twice
Machine will now start to send the document to the number dialed.