Canon IMAGECLASS MF4150 - Manual (Page 148)

11-20
T
roubleshoo
ting
Error Codes
An error code is a four-digit code displayed on the LCD or in the bottom row of a
TX Report or an RX Report when an error occurs.
For details on TX Report and RX Report, see Chapter 4, “Reports and Lists,” in the
Advanced Guide.
See the table below for individual error codes.
Error Code Description Action
0001 The sender may not be using a G3
fax machine. Make sure the sender’s machine is
compatible with your machine.
0070 Reception was manually canceled
on the machine. Ask the sender to resend the
document if necessary.
0071 The machine’s memory is full. Print, send, or delete any
documents stored in memory.
0080 The recipient’s machine did not
respond within 35 seconds. Resend the document. Ask the other
party to check their machine. If you
are making an overseas call, add a
pause to the number.
008D The recipient’s machine has run out
of paper. Ask the recipient to make sure that
paper is loaded in their machine.
00A0 Transmission was manually
canceled on the machine. Resend the document if necessary.
00A1 There is a document jam. Clear the document jam.
00FF All redialing attempts have failed. Check if the recipient’s number is
correct or the telephone cable is
properly connected, and try again.
JOB NO. TYPE NO. DESTINATION TEL/ID DATE TIME PAGE TIME USE MODE RESULT
0001 TX 001 WEST-1
55555555
04/10 16:00 002 02’21 ECM NG
00A0:TX CANCEL
Ex.
Error Code