Casio EX-V8 - Manual (Page 257)

257
USING THE CAMERA WITH A COMPUTER
■
Connecting the Camera to Your Macintosh
after the First Time
Since you need to configure menu settings only the first time you
connect the camera to your Macintosh, later connections are
much simpler.
1. Close the lens cover to turn off the camera
and then place the camera onto the USB
cradle.
2. Press the USB cradle’s
[USB] button.
• Pressing the cradle’s [USB]
button puts it into the USB
mode, which is indicated by
the USB lamp lighting
green.
■
Viewing Camera Images on Your Macintosh
After connecting the camera to your Macintosh, you can view
camera images on your Macintosh screen.
1. Double-click the camera’s drive icon.
2. Double-click the “DCIM” folder.
3. Double-click the folder that contains the image
you want to view.
4. Double-click the file that contains the image
you want to view.
This displays the image.
IMPORTANT!
• Do not leave the same image displayed on your Macintosh
screen for a long time. Doing so can cause image “burn in”.
NOTE
• An image that was rotated on the camera will be displayed
on your Macintosh screen in its original (unrotated)
orientation.
[USB]