Canon Direct Print - Manual (Page 25)

24
„ „ „ „ Setting the Printing Area (Trimming)
Please set [Paper Settings] first (p. 25) before setting the trimming
settings. If the print style is changed after having made trimming
settings, you must select the settings again.
1
Select [Trimming] and press the
SET button.
The trimming frame will appear at the
center of the image. If a trimming setting
has already been selected for the
image, the frame will appear around the
previously selected portion.
. The trimming setting screen differs
depending on the camera model.
Ensure that the screen appears before
selecting settings.
2
Trim the image.
Changing the Size of the Trimming Frame
z Press the zoom lever or the zoom button to adjust the size of
the trimming frame.
z The trimming frame can be changed to a minimum selection
of approximately half the displayed image or a maximum
selection that is virtually the same size as the image.
z Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
z When printing an image that has been magnified using the
trimming option, the image quality may become coarser and
grainier depending on the level of magnification.
Moving the Trimming Frame
z Move the trimming frame using the omni selector or the up,
down, right and left buttons.
Trimming Frame
Printing with Bubble Jet Printers (continued)