Char-Broil 463666512 - Manual (Page 19)

5
6
19
Turn cart upright. Place firebox assembly onto cart, make sure that regulator hose hangs inside cart and control panel
overlaps front panel. Secure firebox to cart using four #10-24x3/4” wing screws and 7x15 fiber washers.
Place burner assembly with two fiber washers into firebox. Insert burner tubes through venturi hole on bottom of firebox.
Make sure burner tubes are engaged with valves. Secure using #10-24 wing nuts (A). Insert one end of burner clip into
hole in venturi tube and hook other end around valve manifold. Attach ignitor wire to ignitor (B).
Firebox Assembly
#10-24x3/4” Wing Screw
#10-24
Wing Nut
Qty. 2
#10-24x3/4”
Wing Screw
Qty. 4
7X15
Fiber Washer
Qty. 2
B
Ignitor
Ignitor Wire
Venturi Tube
Valve
Venturi Clip
Qty. 2
Venturi Clip
Burner Assembly
A
7X15
Fiber Washer
7X15
Fiber Washer
Qty. 4
7X15 Fiber Washer