P. 62, Setting the camera to the color accent mode – Canon A610 User Manual
Page 64
62
Setting the Camera to the Color Accent
Mode
Colors other than the color specified in the LCD monitor are
shot in black and white.
1
(Color Accent)
.
See Menus and Settings (
z
The camera will switch to color
input mode and the display will
alternate between the original
image and the color accent
image (using the previously set
color).
2
Aim the camera so that the color you
wish to retain appears at the center of
the LCD monitor and press the button.
z
Only one color can be specified.
z
You can use the
or
button to specify the range
of colors that are retained.
3
.
z
This completes the setting.
z
If you press the MENU button at this point, you will
return to the screen where you can select a My Colors
mode.
–5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to
retain.
z
The default color accent is green.
z
You may not obtain the expected results after color
input mode if you use the flash, or change the white
balance or metering settings.
z
The specified color accent is retained even if the
camera’s power is turned off.