Canon A610 - Manual (Page 52)

50
To Release the AE Lock
Operate a button other than the
or button.
4
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
You can use the FE lock when using the flash ( p. 51 ).
Changing the shutter speed and
aperture value combination
The automatically selected combinations of shutter speeds
and aperture values can be freely changed without altering
the exposure to shoot images.
1
Set the shooting mode dial to , , or
.
2
Turn on the LCD monitor.
3
Focus on the subject on which you wish
to lock the exposure.
z In and modes, the Safety Shift function works
if [Safety Shift] is set to [On] ( p. 43 ).
4
Press and hold the shutter button
halfway and press the button.
z The exposure setting will lock and the icon will
appear on the LCD monitor.
5
Press the or button until the
desired shutter speed or aperture value
is reached.
6
Recompose the image and shoot.
z The setting will cancel after the shot is taken.