Canon LV 5100 - Manual (Page 16)

16
WIDE TELE
POWER MENU
MODE NORMAL
LAMP
REPLACE
WARNING
TEMP.
READY
LAMP
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or close
the MENU operation.
(P17, 18)
MENU BUTTON
MODE BUTTON
READY INDICATOR
SELECT BUTTON
POWER ON–OFF BUTTON
NORMAL BUTTON
WARNING TEMP. INDICATOR
LAMP INDICATOR
POINT BUTTONS
LAMP REPLACE INDICATOR
Used to select input source
either Computer or Video.
(P22, 29)
This indicator lights
green when the projector
is ready to be turned on.
And it flashes green in
Power Management
mode. (P33)
This indicator is dim
when the projector is
turned on. And bright
when the projector is in
stand-by mode. This indicator turns to
yellow when the life of the
projection lamp draws to
an end. (P36)
This indicator flashes red
when internal projector
temperature is too high.
(P35)
Used to reset to normal
picture adjustment preset
by factory. (P26, 31)
Used to select an item or
adjust the value in the MENU.
It is also used to pan the
image in DIGITAL ZOOM
mode. (P28)
Used to execute the item
selected. It is also used
to expand the image in
DIGITAL ZOOM mode.
(P28)
Used to turn the projector
on or off. (P19)