Cisco 300 User Manual

Page 11

300 Series Managed Switches

Back Panel

The power port and console port are located on the back panel of the
managed switch.

Power—The Power port is where you will connect the switch to power.

Console—The Console port is where you can connect a serial cable to a
computers serial port for configuration using a terminal emulation program.

Returning the Device to the Factory
Default Settings

To use the

Reset

button to reboot or reset the managed switch, do the

following:

• To reboot the managed switch, press the

Reset

button for less than 10

seconds.

• To restore the managed switch configuration to the factory default

settings:

1. Disconnect the managed switch from the network or disable all

DHCP servers on your network.

2. With the power on, press-and-hold the

Reset

button for more than

10 seconds.