Clarion N.I.C.E. 430 - Manual (Page 120)

4.8.2.6 Use traffic information
This button is enabled by default, which means that TMC messages are used in
route planning. Tap this button to have N.I.C.E 430 ignore real-time traffic
information when planning routes.
Tip: If you make a route planning for a future journey, it may be better to turn off
TMC corrected route planning.
4.8.2.7 Recalculate to avoid traffic
This setting is similar to the previous one. Disabling it will not prevent the system
from using TMC data for route planning, but will not trigger an automatic
recalculation when the traffic conditions change during your journey.
4.9 Road safety cameras
Road safety cameras, such as speed cameras and red light cameras are special POI
types in N.I.C.E 430. The application can warn you when you approach one of these
cameras. You can fine-tune this warning in General settings (Page 61).
You can save camera locations manually. It is described in detail at the Cursor menu
(Page 35).
Speed cameras are displayed with small camera symbols on the map.
Warning: Detecting speed cameras may be prohibited by law in certain countries.
Your device can be considered as a speed traps warning system if it contains radar
data.
4.9.1 Camera types
There are four types of speed cameras:
4.9.1.1 Fixed cameras
Some cameras stand by the roadside, looking in one direction, measuring one or
both directions of the traffic. They measure your current speed. For these cameras
you can specify the controlled traffic direction and the speed limit. N.I.C.E 430 will
57