Dell PowerEdge 2900 - Manual (Page 17)

Information Update
17
E171F PCIE Fatal Err
B## D## F##
The system BIOS has
reported a PCIe fatal error
on a component that
resides in PCIe
configuration space at bus
##, device ##, function
##. Remove and reseat the
PCIe expansion cards.
If the problem persists,
see “Troubleshooting
Expansion Cards” in
the
Hardware Owner’s
Manual.
PCIE Fatal Err
Slot #
The system BIOS has
reported a PCIe fatal error
on a component that
resides in the specified
slot. Reinstall the expansion-
card riser. See “Expansion
Card Risers” in the
Hardware Owner’s
Manual.
If the problem persists,
the riser card or system
board is faulty. See
“Getting Help” in the
Hardware Owner’s
Manual.
E1914 DRAC5 Conn2
Cbl
DRAC 5 cable is missing
or disconnected. Reconnect the cable. See
“Installing a RAC Card”
in the
Hardware Owner’s
Manual.
E1B01 USB#
Overcurrent
Device plugged in the
specified USB port caused
an overcurrent condition. Reseat the device cable.
If the problem persists,
replace or remove the
device.
E2110 MBE DIMM # & # One of the two indicated
DIMMs has had a memory
multi-bit error (MBE). See “Troubleshooting
System Memory” in
the
Hardware Owner’s
Manual.
Table 1-2. LCD Status Messages (continued)
Code Text Causes Corrective Actions