Chauvet Work Light - Manual (Page 16)

Operation
-12- COLORado™ 2 Tour User Manual Rev. 02b
Continued from previous page
Control Panel Lock
This setting allows the user to activate or disable the control panel lock, which keeps
non-authorized personnel from changing the fixture’s settings.
1) Press
2) Use or to select On or Off; press to accept.
When the control panel lock is active, the fixture will prompt the user to enter the
password after 30 seconds of control panel inactivity or after turning on the
fixture.
After being prompted to enter the fixture password:
1) Press , , , , and
The above fixture password is unchangeable.
Program Upload
This option allows the user to copy the custom programs of one COLORado™ 2 Tour
fixture onto other COLORado™ 2 Tour fixtures by using the Master/Slave method.
1) Configure and connect the fixtures in a Master/Slave arrangement, where the
master unit has the custom programs you want to transfer onto the slave units.
2) At the master unit, press
accept.
3) Use or to select UPLD; press to accept.
4) When prompted, enter the master access password as shown in Control Panel
Lock.
5) Wait for the upload process to finish before disconnecting the fixtures.
During and after the upload, the master and slave units will visually indicate the
status of the process, as follows:
•
Yellow means that the upload is running.
• Red means that the upload failed due to an error.
•
Green means that the upload completed successfully.
Reset This setting allows the user to reset the COLORado™ 2 Tour fixture to its default
values, including the custom programs.
1) Press
2) Use or to select REST; press to accept.
3) When prompted, enter the master access password as shown in Control Panel
Lock.
4) Wait for the reset process to finish.
Whites Setting
This setting allows the user to select and edit the temperature of the white colors used
in the Macro DMX channel.
1) Press
2) Use or to select a white color (WT. 1~11).
3) Press to accept.
This selects the white color as it is. To edit it, do as follows:
4) Use or to select a color (Red, Green, Blue, or White).
5) Press to accept.
6) Use or to select a color value (0~255).
7) Repeat for the other colors.
8) Press
Continues on the next page