Dell PowerEdge Rack Enclosure 4020S - Manual (Page 14)

12
Installation Guide
2 Remove the right back door.
a While supporting the door, pull the pin for the top hinge out of the
door’s hinge-pin housing. See Figure 3.
You hear a click sound as you pull the pin out of the door’s hinge-pin
housing. The hinge pins are designed to prevent them from being pulled
out of the hinge body.
b Repeat step a for the bottom hinge.
c Pull the door away from the rack.
Figure 3. Removing the Back Doors
WARNING:
Due to the size and weight of the door, it is recommended that you lay
the removed door flat with its outer surface facing upward.
1 hinge pin 2 hinge body
3 hinge-pin housing
1
2
3