Dell PowerEdge Rack Enclosure 4020S - Manual (Page 17)

Installation Guide
15
Replacing the Lower Side Panels
1 Lower the panel into the rack, inserting the panel hook into the back hole
in the bottom of the rack frame and the front hook into the corresponding
hole in the front of the rack frame. See Figure 5.
2 Swing the top end of the panel toward the rack.
3 Press the panel into the rack until both latches lock into place.
Figure 5. Replacing the Lower Side Panels
1 panel hooks (2) 2 latches (2)
3 lower side panel
1
2
3