Slide number 22, Configuring manually (required information), Access point name/network name – Canon ImageCLASS MF4570dw User Manual
Page 22: Network key
22
Configuring Manually (Required Information)
Access Point Name/Network Name
* It may be labeled as “SSID.”
It is the distinguished name for specifying a particular access point.
It is used for selecting an access point.
Network Key
*It is also called encryption key, WEP key, WPA/WPA2 passphrase, PSK or pre-shared key.
It is a password that must be set in order to prevent communications from being intercepted.
It is used for entering the network key.
Number of characters in the network key (number of digits)
It is used for selecting a entry format which corresponds to the number of network key characters (digits)
Type of Encryption (Only when Manually Entering SSID)
You write down here what is the network key that is currently specified for the wireless LAN router or access
point.
The machines supports WEP or WPA/WPA2-PSK.
WEP Authentication Method (802.11 Authentication)
Open System or Shared Key
WPA/WPA2-PSK Encryption Method
Automatic (AES-CCMP or TKIP) or AES-CCMP